Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A 'bond coat' primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel.
Bulls Eye® 1-2-3 contains a biocide that protects the dried coating against fungal degradation, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to fungal degradation on the underside and surface of the primer film, prolonging the life of your paint job.
Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt - inside and out.
Bulls Eye® 1-2-3 is rust inhibitive and ideal for new metal. It resists flash rusting in its "wet" state - and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters - any interior or exterior metal surface.
It has a quick 30 minute drying time and 1 hour dry time. The white finish can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint - saving both time and money and where a dark topcoat is required, the grey or deep tint base can be used for improved hide and coverage.
|Storage||Do not use or store in extremes of temperature and protect from frost.|
|Clean up||Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.|
|General||When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.|
|Data Sheets||See download tab for a copy of safety and technical data sheets.|
|Touch Dry||30 minutes|
|Full Cure||7 days|
|Coverage||10m2 per Litre|