Zinsser Peel Stop

Code: ZINSSER-Peel-Stop

Zinsser Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting, or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. It tightly bonds to old paint and problem areas, forming a sound surface for new paint.

Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces.

Recommended uses: Zinsser Peel Stop prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters.

Total
0.00
Add to Cart

Add to Favourites
Coverage 7.4 to 9.8m2 per Litre
Storage Do not use or store in extremes of temperature and protect from frost.
General When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.
Data Sheets See download tab for a copy of safety and technical data sheets.
Recoatable 2 hours
Touch Dry 1 hour
Full Cure 7-10 days
Clean Up Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.

Please Note: Paint colours on-screen may vary from actual paint. If unsure, we advise purchasing a colour tester to ensure you are happy with your choice. Our tinted products are made to order and are therefore non returnable.