Code: ZINSSER-Peel-Stop
Peel Stop® is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates.
Peel Stop® tightly bonds to old paint and problem areas forming a sound surface for new paint. Peel Stop® forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop® works like nothing else to stop peeling problems on old or new surfaces.
Recommended uses: Peel Stop® prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters.
| Data Sheets | See download tab for a copy of safety and technical data sheets. |
|---|---|
| General | When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity. |
| Storage | Do not use or store in extremes of temperature and protect from frost. |
| Clean up | Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use. |
| Recoatable | 2 hours |
| Touch Dry | 1 hour |
| Full Cure | 7-10 days |
| Coverage | 7.4 to 9.8m2 per Litre |
