Code: PLV274
Polyvine Heavy Duty (HD) Extreme Varnish is used on interior and exterior surfaces requiring an ultra-tough waterproof finish with UV protection. It has a new water-based crosslinked polyurethane with advanced resin technology, bringing the highest protection single pack ever developed.
It is the ultimate protection of interior and exterior surfaces to an industrial level of finish. UV blocking and absorption reduce greying, ageing and deterioration of surfaces. Biocides protect against mildew, mould and fungus. Available in satin and dead flat finishes.
To achieve full UV protection, apply 3 coats of satin before a final coat of dead flat.
Polyvine HD Extreme Varnish Product Info
- Unique qualities: high UV resistance, waterproof, cures in 16 hours, very fast drying, highly chemical resistant, highly heat resistant, industrial level of finish
- Ideal for: brick, stone, slate, tile, wood, flooring, worktops, concrete, flagstone, pavers
- Available in: 1 litre, 4 litre
- Drying time: 30-60 minutes
- Recoat time: 1-2 hours
- Curing time: Allow 48 hours before heavy use
- Coverage: 10-20 square metres per litre
Finishes
Dead Flat
Satin
Preparation
- Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure.
- Sand in the direction of the grain to provide a key.
- Thoroughly clean after sanding.
Application
- Ensure the product is well mixed, but do not shake. Apply 3 coats with a synthetic varnish brush.
- On new softwood and porous surfaces, dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain.
- For a dead flat finish with high durability and stain resistance, apply 2 coats of satin followed by 1 coat of dead flat.
- To achieve full UV protection, apply 3 coats of satin before a final coat of dead flat. Instructions in the technical data sheet must be followed.
