Zinsser Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting, or chalking is a problem. Use indoors or out to form a breathable membrane over questionable or faulty substrates. It tightly bonds to old paint and problem areas, forming a sound surface for new paint.
Peel Stop forms a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Peel Stop works like nothing else to stop peeling problems on old or new surfaces.
Recommended uses: Zinsser Peel Stop prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters.
|Coverage||7.4 to 9.8m2 per Litre|
|General||When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity.|
|Data Sheets||See download tab for a copy of safety and technical data sheets.|
|Storage||Do not use or store in extremes of temperature and protect from frost.|
|Touch Dry||1 hour|
|Full Cure||7-10 days|
|Clean Up||Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use.|